Espada

Original and extremely rare Talbot Berlin new old stock - NOS Talbot Reference 333.01.01.01

Original and extremely rare Talbot Berlin new old stock - NOS Marked 3090101 - Talboval Shape

Original and extremely rare Talbot Berlin new old stock - NOS Marked 3090101

Original and extremely rare Talbot Berlin new old stock - NOS Talbot Reference 300.01.02.01

Seal for Talbot Berlin - ca. 105 mm long

Seal for Talbot Berlin - ca. 112 mm long

Lamborghini Countach 2V, Espada, Jarama, Islero, Miura High Quality Gaskets - made with latest technology and materials in Italy

Lamborghini Reference 006790037 Lamborghini Espada

Lamborghini Reference 006790013 Lamborghini Espada

Lamborghini Reference 001606629 Lamborghini Espada, Miura, Islero, Urraco P250 + P300 Maserati Ghibli I, Indy, Mexico

Lamborghini Reference 004313277  Lamborghini 350GT, 400GT, Espada, Jalpa, Jarama, Miura Some Maserati Ghibli I  Original New Old Stock

Lamborghini Reference 005106531 Lamborghini Espada, Islero, Jarama

Lamborghini Reference 003213716 Lamborghini 350GT + 400GT also some Maserati + Bizzarrini

REFURBISHMENT of your worn out FLYWHEEL is - in most cases -  possible  We work with a highly specialzed company here in Germany  They are following a 4 step process as outlined below: 1. Preparation and Initial Inspection Inspection:   ● Assess surface condition   ● Document existing markings or inscriptions  2. Measurement Process Dimensional Measurement:   ● Measure disc thickness at multiple locations   ● Check runout with dial indicator Geometric Tolerances:   ● Check flatness of surfaces using straight edge and feeler gauge   ● Verify perpendicularity of bores to disc plane   ● Measure concentricity of inner and outer diameters Hardness Measurement:   ● Measure the hardness of the contact surface with the HRC measurement method ● Enter all measured values in inspection protocol   ● Mark deviations from nominal dimensions   ● Photographic documentation for special cases  3. Grinding Process Machine Setup:   ● Dress grinding wheel before starting work   ● Check and adjust coolant supply   ● Secure vibrating disc in clamping fixture Define Grinding Parameters:   ● Select appropriate grinding wheel for the hardness of the steel   ● Plan number of grinding passes Grinding Process:   ● Fine grinding for surface quality   ● Continuous monitoring of dimensional accuracy and surface quality Post-Processing:   ● Deburr all edges   ● Clean flywheel of grinding dust and coolant   ● Surface inspection for cracks or burn marks  4. Balancing Process Initial Measurement:   ● Mount flywheel on balancing spindle   ● Perform unbalance measurement in both planes   ● Document unbalance amounts and angular positions Unbalance Correction:   ● Calculate correction masses   ● Mark holes for balancing weights or material removal   ● Perform correction measures (drilling) Re-measurement:   ● Repeat unbalance measurement after correction   ● Check residual unbalance against tolerance specifications   ● Perform additional correction cycles if necessary Final Inspection:   ● Document final unbalance measurement   ● Visual inspection of correction locations   ● Mark vibrating disc with balancing date PRICE on REQUEST

Inner Diameter 6mm - Outer Diameter 15mm

Inner Diameter 8mm - Outer Diameter 17mm

Inner Diameter 10mm - Outer Diameter 19mm

Inner Diameter 12mm - Outer Diameter 23mm

Suitable for Hoses 4x6

Suitable for Hoses 6x8

Suitable for Hoses 8x10

Suitable for Hoses 10x12

Suitable for Hoses 12x14

Suitable for Hoses 14x16